RESIONE Anti-Impact Resin, 3D Printer Resin with Impact-Resistant and Durable Nylon-Like Resins Which is Wear-Resistant and High-Precision for LCD/MSLA/DLP Prtiner (White-Grey, 500g)

Regular price
$37.99
Sale price
$37.99
Regular price
$0
Sold out
Unit price

Brand: RI RESIONE

Color: White-grey

Features:

  • High impact strength and tensile toughness: The prints can absorb energy well without being damaged under high-speed impact. The elongation at break (81-100%) and fracture stress are very high. The impact toughness and tensile toughness are both good and the toughness can be maintained for a long time. It is an ideal material for printing high toughness impact resistant parts
  • Mechanical properties are similar to nylon and stable for a long time: The prints are quite wear-resistant and fatigue resistant, and the mechanical properties are similar to that of thermoplastic material--nylon. In addition, Anti-impacts prints will not become hard and brittle in the short term like other tough resin prints, their mechanical properties are stable for a long time, and they are suitable for printing impact-resistant, snap-on or movable parts, or even end-use products
  • Low water absorption, low-temperature resistance, good weatherability: The water absorption is as low as 0.46%, which can meet the needs of some humid environments or underwater operations. In addition, the mechanical properties of the printouts in winter, summer, or dry and wet environments have little difference, and the weatherability is good
  • High dimensional accuracy, fine and wear-resistant surface: Anti-impact prints can meet the tolerance requirements of the outer diameter and aperture of the same printed part at the same time, with high dimensional accuracy. And the special formula makes the printing surface smooth and delicate, wear-resistant and scratch resistant
  • Special smell, and not suitable for novices: Anti-impact resin liquid has the characteristic smell of acrylate, which is quite pungent. Anti-impact liquid viscosity is relatively high (25 ℃/77 ℉, 700mpa. s), and the stiffness of thin wall or thin diameter structure is not enough, so the printing difficulty is higher than that of standard/rigid resin.

EAN: 0735907976447

Part Number: ANTI REISN

model number: Anti-impact 500g

Go to full site