NewVersion- Epoxy Resin UV Glue Kit Clear Transparent Solar Curing with Lamp Molds Liquid Color Pigments 30 Bezels for Pendants Earrings 36

Brand: Joligel

Color: New Full Kit

Features:

• FASTER CURING: The Latest Developed UV Resin can be cured completely hard under a 6W mini UV lamp in only 2 minutes (1 minute curing for both sides), which means less time and lower wattage needed for the curing process, hugely advanced comparing to our past version (4 minutes under 36W).
• HIGHER QUALITY: Undoubtedly excellent transparency, 100% crystal clear and non-yellowing, with hard glassy finish and uniform gloss. Comprehensive upgrading: Less shrinking, less bubbles, lower viscosity, better liquidity.
• SAFEST: Non-toxic, no harsh chemicals, cruelty free materials. Material safety datasheet available for checking. Note: This product is sensitive to light and heat and needs to be stored in a cool, dry place, protected from light.
• MEGA-PACKED: 30 metallic open back bezels, smooth finish, strong colour retention. Cute designs including kittens, christmas patterns, pumpkin, candy, unicorns, castle, etc. Come with 2 reusable glueless tapes to be sticked to the back of the bezel so you can fill it with resin. Ideal for pendants earrings or charms making.
• INDISPENSABLE THINGS: Silicone moulds with multiple realistic shapes of different sizes enough to make various jewellery such as earrings, pendants, necklaces, bracelets, etc. Silicone easy to clean. Come along with 100 gould metal eyelets so you can carry the pendants made with epoxy more easily.

Binding: Office Product

Part Number: J-2D-NewFS

Details: Package: 8x New UV Resin 30ml 1x Tweezers 1x UV Lamp with USB cable 36x Decorations (glitter & dried flowers) 30x Open back bezels 2x Tapes 13x Silicone moulds 100x Golden eyelets 13x Liquid pigments (can be blend to make new colours) Instructions: -Directly pour the resin in the mold or the bezel. -Add the pigment, glitter, dried flowers or anything you want in it using a toothpick or tweezers, and cure the resin with UV light. -Gradually add the amount of the pigment to adjust the color instead of pouring too much pigment at a time. How to avoid bubbles: 1. UV resin should be poured in silicone molds in layers, allowing air bubbles completely escape. 2. To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up. For example, heat the oven to 80℃(176℉), turn off, ventilate it a little and filled the mold with the resin. 3. Before using the resin, place it upside down to prevent air bubbles from escaping during extrusion. 4. Use a toothpick to concentrate the air bubbles on the surface of the resin. Puncture them with a pin or undo them by applying heat with a heat gun or a lighter. Attention: -Avoid contact with eyes, skin and clothing. -If you accidentally splash into your eyes, rinse immediately with plenty of water. -Rinse immediately with soapy water after skin contact. -Keep out of reach of children. -Store the product in a cool, dry place, protected from light.