RATTMMOTOR CNC Controller Kit, 4 Axis CNC Kit with Nema23 Stepper Motor 57*76mm 270Oz-in 3A 1.8Nm, TB6600 Driver 4A, USB Mach3 CNC Motion Control

Brand: RATTMMOTOR

Features:

• 【Nema23 Stepper Motor】Step Angle: 1.8°; Current: 3.0A; Holding torque: 180N.cm/18kg-cm 270 oz-in; Shaft : single shaft,8mm diameter.
• 【TB6600 Driver】(1) VInput voltage: DC9-42V; Maximum power consumption: 160W；Output current: 0.5-4A. (2)Suitable for driving 42-57 two-phase and four-phase hybrid stepping motors, which can achieve low vibration, low noise and high speed driving effect.
• 【USB Mach3 Motion Control Card】 (1) This USB motion card does not need install any USB driver, Windows2000/XP/Windows7,can directly identify (Notice: Doesn't support Win8/win10/macOS system !!!) .
• (2)4-axis linkage, Maximum step-pulse frequency: 100KHz, support connect four stepper motor drives or servo drives; (3) Signal Output:0-10V, it can control the spindle motor speed through using mach3 software.
• 【DC Switching Power Supply】The DC voltage of this 350W switching power supply with rated power is 24V, rated current is 14.5A; ripple and noise are 150mVp-p, voltage adjustable range is ±10%, voltage accuracy is ±1.0%, linear adjustment rate And load regulation rate are both ±0.5%. Start-up time: 200ms, 50ms/230VAC; 2000ms, 50ms/115VAC (at full load).

model number: 4 axis

Part Number: TB60B-4

EAN: 0754193834842

Package Dimensions: 10.6 x 10.0 x 6.5 inches