Brand: CDIYTOOL
Features:
- Our table saw fence parallel positioning tool is made of solid aluminum construction red anodized to better protect your fence.
- Simple Set Fence Gauges fit in your table saw miter slot and hold an extendable stainless steel touch-off probe perpendicular to the slot. Just slide the probe until it touches your fence, lock the thumbwheel and that' s it - a physical reference between the miter slot and the fence
- Slide a Simple Set into the miter slot near the front of the table, slide the probe over to the fence, lock it and make a mark on the fence where the probe touches,move that Simple Set to the back of the table and install the second at the front. Adjust the second one to the witness mark you made on the fence and you have two points exactly the same distance from the miter slot, one at the front of your saw and one at the rear.Adjust your fence until it perfectly aligns to both points&boom,done.
- When you have your fence set for a certain critical cut, but you have to change it for something else.When you need to come back to exactly the same dimension later, don' t rely on the scale.Slide a Simple Set in the track and set the probe to the fence. When you need the fence back at exactly the same spot, just slide the Simple Set back in the track and reset your fence.
- Precision steel pin measure about 350mm/13.78 inch; Fixed block is 54x105mm/2.13x4.13 inch. Our simple set works with any table saw that has a miter slot nominally 3/8" x 3/4".
Part Number: 656dfdghtg