Brand: RATTMMOTOR
Features:
- 【Description】The tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of no vibration and malfunction, the thermal deformation of the machine can be corrected according to the rated voltage and current and the specified speed.
- 【Parameter】This is a normally open 4-wire high-precision tool setting instrument with a stroke of 5mm. The positioning accuracy is 0.001mm, the contact life is up to 3 million times, the contact force is 1.5N, and the contact rating: DC24V 20mA.
- 【Material】The housing material of this tool setter is made of 4S grinding grade material. The bottom magnet design can be directly connected to the machine and firmly adsorbed to the body. The contact material is made of super hard alloy, the design is exquisite and the installation is simple.
- 【Feature-1】This tool setting instrument is designed with dustproof and waterproof structure, which can still have strong durability under the condition of coolant and iron filings. It does not need a built-in amplifier and will not be caused deviations by the location temperature and power supply voltage fluctuations of the tool setting instrument, which can be directly input to the NC program.
- 【Feature-2】The tool setter will send out an alarm signal in time when it is over-travel to avoid other troubles caused by equipment operation. Moreover, the tool setter has strong anti-interference. The protruding sharp corner of the tool directly touches the tool tip related to the machining size, detects its value and size, and outputs the signal. It has higher accuracy than the average value obtained by converting the amount of light and electricity.
model number: H:65
Part Number: H:65
Details: Package include:
1 x CNC Router Z Axis High Tool Setting
Specification:
Output mode: NC(normally closed)
Pre trip: Almost 0
Stroke: 5mm
Repeat positioning accuracy: 0.001mm(operation speed:50-200mm/min)
Life: 3000000 times.
Contact force: 1.5N
Outer shell: Grinding 4S.
Protection: IP67
Cutter head: Diameter 20mm, hard carbide
Shock rating: 20mA(MAX) DC24V recommended value(10mA)resistive load
Cable: 1.5M 2-cell tensile strength 30N Minimum bending radius R7
Protection Tube: 1.3M (Minimum bending radius R25)
Exceed the specifications: NC(Normally closed),distance signal about 5mm
Shock rating: DC24V 20mA(MAX) 10mA(Resistive load).
Precautions for use:
The contact cannot exceed the stroke(stroke is 5mm) of the tool setting tool, otherwise the tool will easily damage the tool setting tool.
Do not release it immediately when touching the tool face by hand to avoid damaging the internal structure of the tool setting tool and affecting the service life and efficiency.
After the tool is finished, the knife must be lifted vertically to leave the contact surface. Do not move it laterally. This should be easy to damage the tool.
EAN: 0619191755172
Package Dimensions: 6.0 x 4.2 x 2.8 inches