Gummy Candy Charms Epoxy Resin Silicone Molds Bear, Cola Bottle, Orange Slice 4-Count

Brand: FUNSHOWCASE

Color: Clear,Orange

Features:

• Small assorted clear sugar candy cabochon rubber molds set make resin jewelry, fondant cake deocrate, cute chocolate and candy, sample soap accent, ice cubes, polymer clay project.
• Cast pop or soda bottle earrings, colorful bear pendant, lemon slice keychain, cabochon, drink or summer theme ornament
• Mainly use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin), concrete, cement, plaster, hot glue, soap, candle, wax, gypsum, mix media and more
• Transparent soft mold, you can check the buttom when process project. Easy to demold, gloss finish
• Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit

model number: 3105-3108

Part Number: 3105-3108

Details: Dimension
Each cavity approximate
Coke bottle_1.14x0.39inch / 2.9x1cm
Larger bear_0.94x0.87inch / 2.4x2.2cm
Smaller bear_0.83x0.67inch / 2.1x1.7cm
Tangerine slice_0.79x0.47inch / 2x1.2cm
Mold color: clear
Finish: gloss (may require polish/glaze if need a shiniest/most glossy look)
Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit
Can be used with dishwasher/oven/refrigerator
Food grade, no BPA/PVC/phthalate
Wash and boil before use, especially for food
More Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water-base ink for resin casting. 5) After baking clay / resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.

Package Dimensions: 5.9 x 4.1 x 0.6 inches