NOVA3D High Clear 3D Printer Resin,Highly Transparent Crystal Clear Tough 3D Printing Resin, Resist Yellowing ＆ Low Odor 405nm UV-Curing Rapid Resin for LCD/DLP Resin 3D Printers (Ultra Clear,

Brand: NOVA3D

Color: Clear 500g

Features:

• ✅Non-yellowing: NOVA3D Ultra-Clear Resin will not turn yellow after printing and curing. The transparency resin prints out models with pure and clear colors that look like a work of art. It is as transparent as glass after polishing.
• ✅Fresh Color & Easy to Use: Fadeless, difficult to turn yellow and smooth surface after cured. Cured model is easier to remove from the platform, Utmost to reduce platform scratched when you remove the prints.
• ✅Low Viscosity & Good Fluidity: Good fluidity enables the high clear resin to penetrate and cure quickly, improving the success rate of model printing. Low viscosity makes the model easy to release.
• ✅Low Odor & Printer Pringting resin challenge: NOVA3D Ultra clear transparent resin, with low odor, will not cause any trouble to you. There are some challenges for beginners in the resin printing process. It can print crystal clear and beautiful models, and it will be even cooler with a layer of paint.
• ✅Wide Applications: The crystal clear resin specifically designed for MSLA LCD 3D printers, widely applicable to most 8K/12K/14K/DLP/LCD 3D printers using 405nm wavelength light source.

Details: What’s difference with normal clear and high transparent?
1.The yellowing of normal clear resin has always been a shortcoming criticized by 3D printing users, and this transparent resin will not become yellow.
2.After the second treatment, this transparent resin will have transparency similar to glass and acrylic sheet. This is a real transparent resin.
Special Using Note:
1. This resin can only be used for models with high light intensity which UV light more than 3500uw/cm². The resin viscosity is higher than normal resin, it is difficult to cure by low-intensity LCD printer (RGB screen printer).
2. The printing time of this resin on the normal layer (monochrome screen) is 6s.
3. The poured resin should be used up as much as possible at one time. This resin is prone to change during the curing process, and the remaining resin in the tank is prone to yellowing during the second use.
4. The storage must be completely protected from light.
5. The surface of the cured product is prone to blurring when exposed to alcohol (but better than the previous rigid and transparent resin), and the subsequent polishing oil can be completely transparent.
Specification & Parameter:
Layer Height: 0.05 mm
Technology: UV LCD Photocuring
Bottom exposure time: 30s
Exposure time：6s
Lift total height: 4mm
Lifting speed: 120
Retract speed: 120

Languages: English

Binding: Electronics

Part Number: NOVA3D

model number: NOVA3D