SCULPFUN S10 Laser Head Module, 10W Optical Power Higher Accuracy Fixed Focus Laser Module for Laser Engraver Cutter with Air Assist Nozzle Tube and

Brand: SCULPFUN

Color: Blue

Features:

• 【High Density 10W Laser Power】Adopting ultra-thin laser beam shaping technology, the optical power of SCULPFUN S10 laser head is increased to 10W, which is twice that of the S9. But it obtains the same ultra-thin laser beam with 0.08mm focus as S9, which means S10 has higher energy density, stronger cutting penetration and engraving capabilities. It can cut high density woods such as MDF and walnut easier.
• 【Powerful High-Speed Air Assist】SCULPFUN S10 laser module comes with a high-speed air assist nozzle and tube design. The nozzle adopts an advanced fluid mechanics design to better utilize the air pressure. It can spray high-speed airflow up to 14.5m/s and greatly improve the cutting penetration, cutting efficiency and cutting quality when connected to the 30L/min 0.03Mpa air compressor(need to buy additonal) it fits.
• 【Adjustable Laser Eye Shield】With the upgrade of S10 laser head, the laser filter shield which blocks the dazzling laser is also upgraded to be adjustable. It can be adjusted up or down, flipped or removed to meet your needs. Since the laser is more powerful, we recommend that you wear a pair of laser protective goggle to protect your eyes if you want to remove this laser filter shield.
• 【Engraving and Cutting Materials】SCULPFUN S10 laser head set can be used to engrave all kinds of wood, including walnut, cherry and other high-density wood, MDF, zigzag, cardboard, plastic, leather, PCB board, aluminum oxide, 304 stainless steel, ceramic, dark stone, and cut all kinds of wood, MDF, acrylic board, cardboard, non-woven, bamboo, leather, some plastic boards, PCB boards.
• 【Widely Compatibility】The SCULPFUN laser module uses a common 12V/PWM modulation board with 3pin interface, which can be well adapted to different laser engraving machines, 3D printers, CNC milling machines, etc. It can be installed on a variety of brand machines, especially for upgrading SCULPFUN S9/S6 Pro/S6 laser engravers and some other 5W laser engraving machines.

model number: S10-LH

Part Number: 9559074379471

Details: Specification
Product model: SCULPFUN S10 Laser module Set
Laser output power: 10W (light energy)
Inner diameter of air pipe: 7.5mm (recommended to use 30L/min, 0.03Mpa air compressor, out diameter of nozzle:8mm)
Laser wavelength 455±5nm
Laser type and fixed focus: fixed focus laser, fixed focus through 50mm measuring column
Laser protection cover: Equipped with a detachable laser protection cover to protect the eyes. You can adjust it up and down, or remove the goggles.
Laser shell material: aluminum alloy

Laser circuit board parameters:
Circuit Board Size: 40*40mm
Circuit Board:12V/PWM modulation board
Input voltage: 12V
Max Input of laser module:12V 5A
Wire Rod: HY2.0, 3Pin terminal (3-core cable, A: PWM +, B: GND, C: VCC ).
Fan:12V 0.15A 4020 fan
Fan speed: 15000 rpm
Operating temperature: -20 ℃ to 70 ℃
Package weight: 0.85kg
Packing size: 22.7*13.6*9.5cm

S10 laser module packing list:
7.5mm inner diameter air tube
acrylic protective cover
S10 Laser head*1
Multi-function connector*1
50mm measuring column*1
Screw and tool kit*1

Note:
1. Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if you're not around.
2. For detailed machine instructions, please refer to the manual for parameter settings.
3. When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.
4. Do not touch the laser with your hands, otherwise you may burn your hands.
5. Please avoid strong impact on the machine.
6. It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.
7. Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.

EAN: 9559074379471