Brand: StrongTools
Features:
- Professional Manufacturer: Our supplier is a professional manufacturer to produce Pneumatic Tools more than 15 years. We have special machining process and high standard quality control system to ensure all of our products withstand industry grade using requirement.
- Wide Using Field: Available to polish Wood, Metal, Wall, Glassfibre and other surface. Cobinate with different Sanding Pad, Sanding Discs, Polishing Sponge Cushion or Polishing Pad for various using areas, such as furniture polish, car waxing polish and ect.
- High Speed: Unloaded speed is more than 10000RPM (adjustable). High precision axis works stably under high speed, ensure high quality polish finish.
- Self-cleaning vacuum Device: Syphon principle self-cleaning device, remove most of the dust in the air to protect people’s healthy.Human Friendly Design: Aluminum alloy core components ensure the product is lightweight but sturdy. Easy holding design to ensure user can use it easy.
- Various Components: Include one 5” Sanding Pad, one 6” Sanding Pad, 5pcs sanding papers for each sanding pad. Meet most of normal polish requirements and conditions.
Binding: Tools & Home Improvement
model number: ST-PGJ-313B
Part Number: ST-PGJ-313B
Details: 【Warm Tips】
Use a clean lubricated air supply that will give a measured air pressure at the tool of 6.2 bar (90psi) when the tool is running with the lever fully depressed. It is recommended to use an approved 10 mm (3/8 in) × 8 m (25 ft) maximum length airline. Connect the tool to the air supply as do not connect the tool to the airline system without an easily accessible air shut off valve. It is strongly recommended that an air filter, regulator and lubricator (FRL) be used as this will supply clean, lubricated air at the correct pressure to the tool. In any case appropriate air pressure regulators shall be used at all times while operating this tool where the supply pressure exceeds the marked maximum of the tool. Details of such equipment can be obtained for your tool distributor.
If such equipment is not used, the tool should be manually lubricated. To manually lubricate the tool, disconnect the airline and put 2 to 3 drops of suitable pneumatic motor lubricating oil into the hose end of the tool. Reconnect tool to the air supply and run tool slowly for a few seconds to allow air to circulate the oil. If the tool is used frequently, lubricate it on a daily basis or lubricate it if the tool starts to slow or lose power. It is recommended that the air pressure at the tool be 6.2 bar (90psi) while the tool is running so the maximum RPM is not exceeded. The tool can be run at lower pressures but should never be run higher than 6.2 bar (90psi). If run at lower pressure the performance of the tool is reduced.
【Specifications】
☛Body Material: Aluminum Alloy
☛Sanding Pad: 5 inch or 6 inch
☛Free Speed: 10000RPM
☛Pendulum Diameter: 1/4"
☛Working Pressure: 6.3bar
【Package Included】
◆1 x Air Sander
◆1 x Quick Connector
◆1 x Wrench
◆5 x 5in. Sandpaper
◆5 x 6in. Sandpaper
◆1 x TeflonTape
◆1 x User Manual
◆1 x Dust Pipe
◆1 x Dust Bag
EAN: 0723508605989
Package Dimensions: 8.8 x 6.4 x 4.9 inches