Brand: ELEGOO
Color: Mars 4
Features:
- 【7 inch 9K LCD Screen】 ELEGOO Mars 4 3D printer features a 7" 9K mono LCD screen with a resolution of 8520*4320. The maximum printing speed is 70mm/h, which greatly improves the quality and accuracy of the model
- 【COB UV Light Source】 The COB light source composed of 36 LEDs has higher uniformity of light and makes the model details more realistic. Equipped with a large heat dissipation structure, which can quickly and efficiently dissipate heat and prolong the service life of the printer
- 【Laser Carved Build Plate】 Equipped with an upgraded laser carved build plate, which provides stronger adhesion to the bottom of the model and improves the success rate of printing. The linear guide rail design of the Z axis makes the printing process more stable and the model effect more better
- 【Voxeldance Tango Slicing Software】 The 3.5-inch touch screen has the functions of model preview and implementation progress bar. The new Voxeldance Tango slicing software has 3 printing modes to choose from. ELEGOO brand independently developed, open source GOO slice format, compatible with a variety of slice software
- 【Printing Tips】Suggestions for ensuring successful printing and protection of the LCD screen/release film: ① Before printing, please ensure that the parameters of the machine are correctly debugged. ② Add the model support correctly in the slicing software and improve proficiency in the use of slicing software. ③ Clean up the resin tank in a timely manner after printing
Details: About Brand Vision
Create the future, interpreted as "With the help of programming and 3D printing technology, we can create almost anything—Elegoo provides geeks with the key to a new world.”
Basic Parameters
XY Resolution: 18*18um [9K 8520*4320]
Z Axis Accuracy: 0.02mm
Layer Thickness: 0.01-0.2mm
Printing Time: 30-70mm/h
Power Requirements: 100-240V; 50/60Hz; 24V/3A
Dimensions: 227mm(L)*227mm(W)*438.5mm(H)
Build Volume: 153.36mm (L)*77.76mm (W)*175mm (H)
Weight: 6.8kg
System: EL3D-3.0.1
Technology: MSLA Photocuring
Light source: COB(wavelength 405nm)
Slicer Software:Chitu Box & Voxeldance Tango
Connectivity: USB
Operation: 3.5 Inch Touch Screen
Precautions
Please Keep the Mars 4 3D Printer and its accessories out of the rach of children.
When you use the printer for the first time, you would need to adjust it before printing(Unbox and Test).
If the Printing failed, you would have to clean the resin tank and change resin otherwise it may cause damage to your printer.
Please only fill 1/3 of the resin tank only and don't fill it up.
Please use 95%°(or higher) ehtyl alcohol or isopropyl alcohol to wash your model unless you are using water washable resin.
Please use the printer indoors and avoid direct sunlight and dusty environment.
Please keep your printer away from water or damp environment.
Please wear a mask and gloves before using and avoid direct skin contact.
If you want to print models with sharp edges please be careful when removing it from the build platform.
Please don't disassemble the Mars 4 3D Printer by yourself.
If you run into emergency issues please shut down the power of the printer first.
Part Number: US-SO-3D-M4