for Voron 2.4 Ender 3 V2 Pro Cr10 Ender 5 Pro/Plus Ender 6 Rapido Dragon Hotend 3D Printer Part Kit, Xirbbo Upgrade 24v Ceramic Heating All Metal Hot end Copper Heater Block Bimetal Heatbreak

$25.38
$25.38
$0
Sold out
View full details

Brand: Xirbbo

Features:

  • ✅Hotend COMPATIBILITY: There will be two different connector adapters. Compatible with Voron series, Ender 3, ender 3 Pro, ender 3 V2, Ender 5 series, ender 2 series, ender 6, CR10 series, CR10S 3D printers.
  • ✅Package: (1 Set Of Hot Ends As Shown In First Photo); Firmware Options: Marlin Firmware Configuration: NTC 100K MGB18-104F39050L32 Thermistor 4.7k Pull-Up
  • ✅Ceramic Heater: 24v 48w Thermistor: NTC 100K MGB18-104F39050L32, Tracking To 22-33mm³/S. Compared With The Normal Chc Hot End, The Ceramic Heater Tube And Thermistor Of This Hot End Are Separate Instead Of Soldering, Users Can Replace It Very Easily Without Replacing The Whole Heater Block Kit.
  • ✅All Metal Design: Upgraded The Heatsink To A Bimetallic Heatsink - Tc4 Titanium And Copper Plated, Using A Ceramic Heater Core And A Larger Melting Area For Better Heat Dissipation, The Version Has A Very Sturdy Construction As The Heatsink Is Fastened To The Heatsink With Two Small M2 Screws.
  • ✅Heater Block Upgrade: It is nickel plated copper, the material itself can reach up to 500 degree Celsius and conducts heat quickly, but the heater core and thermistor are only rated for 300 degree Celsius, but can be used to print with almost all existing special filaments. (However, the maximum print temperature of the heater 24v 48w and thermistor is 300 °C, so the whole heat head can only be used for printing up to 300 °C. Please note).
  • ✅The Nozzle Is Made Of Hardened Steel：Threaded Connection, Contact With The Bottom Step Of The Insulation, Completely Solve The Phenomenon Of Shedding And Reduce The Possibility Of Leakage. Removable Nozzles Can Be Easily Replaced, Saving Time.
  • ✅Warm Tip: If You Are Looking For A Hot Air Head That Can Print At Higher Temperatures And Faster Speeds Without Generating Heat, Then This Hot Air Head Will Be Your Best Choice.

Details: Package: 1x heatsink, 1x integrated heater block tube with hardened steel nozzle 0.4mm. 1x ceramic heater ,1x thermistor, 1xsilicone cover(can reach 300C degree) and 2x cable extension,1set wrentch tools.

Part Number: mk8 nozzle

Go to full site