Brand: FUNSHOWCASE
Color: Clear
Features:
- 3 different styles of ballpoint pen molds with 3-color ( black/blue/red ) refill 15-count. 3 different styles of fountain Pen molds with 1 pen cartridge.
- Use with modelling clay (air clay, paper clay, resin clay, polyclay, polymer clay, salt clay, metal clay, liquid clay etc.), resin(epoxy resin, rethane resin, uv resin, polyester resin), concrete, cement, gypsum, plaster, hot glue, soap, candle, wax, mix media and more. Can also be used with food material such as ice, gum paste, jelly, marzipan, fondant, sugarpaste, melted candy & chocolate etc.
- Durable and transparent soft mold, you can check the buttom when process project. Easy to demold, shiny finish. Demolding tips: Add baby oil or butter to mold till resin dried, twist it then figurine will pop out!
- Food Grade. Food and Non Food material should use separately. Wash and boil before use, especially for food. Easy to use mold very flexible and easy to clean, can be used in oven, dishwasher, refrigerator etc. Tip: Wash in warm soapy water, and they will last for years!
- Can be used within the temperature between -40~220 centigrade / -40~428 fahrenheit
Binding: Office Product
model number: 4074-4076 4077 4078-4083
Part Number: 4074-4076 4077 4078-4083
Details: Mold color: clear Finish: gloss (may require polish/glaze if need a shiniest/most glossy look) Suffer temperature: -40 to 230 centigrade/ -40 to 446 fahrenheit Can be used with dishwasher/oven/refrigerator Food grade, no BPA/PVC/phthalate Wash and boil before use, especially for food More Tips to use with Epoxy Resin: 1) Poured in silicone molds in layers, allowing air bubbles completely escape; 2) To expedite the process of escaping of bubbles and time of solidification of resin, the mold can be a bit warmed up, for example, heat the oven to 80°C, turn off, ventilate it a little and put mold, filled with resin in the oven. 3) Follow resin instruction for the time need to cure, measure and mix resin properly. It does not mean it has been cured if it is hard. 4) Do not use water-base ink for resin casting. 5) After baking clay / resin in complex or deep molds release the finished product under running water with soap. 6) Put in refrigerator a while/ soak in hot water a while/ release with baby oil if it is hard to release.
Package Dimensions: 7.3 x 6.1 x 1.3 inches