Brand: Hougen
Features:
- ✔️ TWO FLATS FOR CUTTER MOUNTING — This system is very rigid and offers up to 2x the tool life as compared to quick change or one touch tool mounting systems. The Original Mag Drill Annular Cutter From Which All Others Are Measured.
- ✔️ GROUNDED & FULLY FLUTED — Provides better chip evacuation, requires less HP and offers better performance in deeper holes.
- ✔️ O.D. MARGINS — Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish.
- ✔️ PATENTED HOUGEN-EDGE GEOMETRY — Provides faster, smoother cuts, with less chatter. Each tooth has two or three angles.
- ✔️ I.D. TAPER — Relief area between slug and cutter. Reduces horsepower and improves slug ejection.
Details: The original mag drill annular cutter from which all others are measured.
Item Details
For use with Hougen Portable Magnetic Drills and many competitive models on materials up to 275 BHN (28.5 HRC). They are made of hardened M2 high speed steel and are precision ground for excellent performance throughout the cut and long tool life. They require less horsepower and thrust to cut, and last much longer than traditional holemaking methods. "12,000-Series" cutters have a 3/4" diameter double-flatted shank. Modified end tooth geometry is also available for drilling in stacked plate applications. For extended tool life and lower cost per hole "12,000-Series" Cutters are resharpenable.
Benefits
Makes large diameter holes efficiently without the mess of chips
Hole produces a slug of material that could be used for another job
Features
Hardened M2 high speed steel material
Precision ground & fully fluted provides better chip evacuation, requires less horsepower & offers better performance in deeper holes
3/4" double flatted shank is very rigid & offers up to 2 times them tool life as compared to quick change tool mounting on competitive products
Only a thin area of material touches the outside of the hole which provides for less friction and a better hole finish
Patented hougen-edge geometry provides faster, smoother cuts, with less chatter
Tapered inner diameter provides a relief area between the slug & cutter to reduce horsepower & improve slug ejection
Up to 10 cutting edges distribute the cutting load evenly to maximize feed rates
The slug offers a higher scrap value than loose chips
EAN: 0662850002186
Part Number: 12006
model number: 12006