Brand: Magic Resin
Color: Clear
Features:
- ✅ PREMIUM QUALITY - The product cures to a clear, high build, glass like finish that resists scratching, yellowing and will not distort with age
- ✅ NON-TOXIC - Enjoy this safe odor free and non-toxic resin epoxy for any kind of job
- ✅ EASY TO USE - Magic Resin kit is a 100% solid, two component, clear polymer coating that is mixed at a 1 to 1 ratio by volume. Each pour should not be more than 1/4 inch
- ✅ HIGHLY RESISTANT - This product is scratch resistant, water resistant and will not exhibit blushing or sweat out under high humidity conditions
- ✅ WHAT'S INCLUDED & COVERAGE - Each kit contains a bottle of resin (1 Gal.) and a bottle of hardener (1 Gal.) 96 sqft Seal Coat (1 mm thick) or 32 sqft Flood Coat (3mm thick). Made in USA
Part Number: MR2G
Details: Description
About Magic Resin
Clear epoxy coating for table tops, bar tops, counter tops and artistic applications. Our product is used extensively by many artists, contractors, commercial restaurant chains throughout the world and also by many do-it-yourselfers.
Overview
Magic Resin kit is a 100% solid, clear polymer coating that is mixed at a 1 to 1 ratio by volume. The product cures to a clear, high build, glass like finish that resists scratching, yellowing and will not distort with age. Items coated with it will become permanently preserved and protected for your enjoyment throughout a lifetime. This product will not exhibit blushing or sweat out under high humidity conditions.
Application
The product should be applied in two stages. The first stage is referred to as the seal coat. The seal coat is brushed on in a thin layer and is used to seal any pores in the surface and prevent air bubbles from forming in the following flood coats. This stage is followed by the flood coat, which will flow and self level, clean brushes or squeegee can be used to help spread the epoxy. Flood coats are applied in 1/8" layers at a time, as many as desired can be applied, however one to three coats is average for most table or bar coatings.
Re-coating/Between Layers
Re-coating can usually be be done within 4 to 8 hours. If re-coated within this time period no sanding is necessary between layers. If your previous layer has fully dried, very light sanding with 220 grit sandpaper is recommended to achieve a good bonding surface. After sanding you should wipe down with a solvent such as denatured alcohol or acetone to remove any impurities from the surface. (do NOT use mineral spirits).
Authentic Magic Resin Products
At Magic Resin, you can buy our high quality products with confidence.
EAN: 0763236158425