Brand: SUNLU
Color: 250g*8 Black+white+grey+blue+green+red+orange+pureyellow
Features:
- 【2kg in Total, 0.25kg per Spool, 8 Rolls of 0.25kg 1.75mm PLA+ Filament】8 rolls of 250g SUNLU 1.75mm PLA plus filament. Color: Black+White+Grey+Blue+Green+Red+Orange+PureYellow. The design of 250g PLA+ filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users.
- 【Small Spool Diameter】- Spool Diameter: 120mm(4.7inches), Spool Width: 43mm(1.69inches), Spool Hub Hole Diameter: 42mm(1.65inches). 250G spool size of the SUNLU filament mini spool is suitable for hanging on a lot of FDM 3D printers.
- 【SUNLU 100% Wound Neatly Filament】- SUNLU R&D team has mastered advanced technology and produced 100% Neatly Wound PLA+ Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.
- 【SUNLU PLA PLUS 3D Filament Advantages】- PLA PLUS filament is 10 times stronger than PLA Filament, the color is brighter, it has many advantages, Clog/Bubble/Tangle/Warping/Stringing free, easy to Use, better layer adhesion.
- 【1.75mm Diameter】- Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, it's suitable for almost all 1.75mm FDM 3D printers.
- 【Recommend Settings】- We recommend printing at a Nozzle/Extrusion temperature of 210°C - 235°C (410°F - 455°F) and Bed/Platform temperature of 55°C - 65°C (131°F - 149°F).
- 【Strong compatibility】- SUNLU 3D Filament is not only applicable to all SUNLU 3D printing products: FDM 3D Printer, 3D Printer Accessories, Filament Dyer, but also applicable to almost all FDM 3D printers of other brands. For example: Ender 3/Ender 3V2, etc.
Details: FAQ:
● Why can't the filaments stick to the build bed easily?
● Please do 3 steps checking！
① Temperature
Please check the temperature(bed and nozzle) settings before printing and set it suitable.
② Building Bed
Please check if the bed is level, make sure the nozzle doesn't too far or too close to the bed.
③ Speed
Please check if the printing speed of the first layer is too fast(Recommended: 20-40mm/s).
Recommended Settings:
● Nozzle 210°C - 235°C (410°F - 455°F)
● Bed 70°C - 80°C (158°F - 176°F)
● Printing Speed: 40-80(mm/s)
● These settings are for 0.4mm nozzle, it may be different with different diameters nozzle
Notes
● Please insert the filament into the side holes after use to avoid tangles.
● Feel free to message us if you have any questions about the filament.
● Please stored the 3D printer filament in a sealed bag or box after using it.
Binding: Office Product
Part Number: SUNLU-PLA PLUS250G
model number: SUNLU-PLA PLUS250G