6 Pack 10 inch Sublimation Wind Spinner Blanks, 2 Sided Printable Sublimation Stainless Steel Metal Wind Powered Kinetic Sculpture for Yard and Garden, Heat Press Transfer Sublimation Blank Products

Brand: Wefanify

Color: White

Details: Easy to Assemble
Wind Spinner will get the best reflection and optimal wind when the veins are bent at a 65 degree angle. To achieve this look, push the vanes towards you in the right hand and while simultaneously away from you with the left hand. Gently bend the outer metal rings to your desired shape for the wind spinner.
Referential Printing Parameters: Temperature: 356ºF~385ºF Time: 60-80 seconds Pressure: Medium
REMOVE PROTECTIVE PLASTIC FROM BOTH SIDES.
Secure the sublimation transfer to the substrate with the image facing down on top and press between blowout paper with medium pressure at 356ºF~385ºF for 60-80 seconds. Remove from heat and remove transfer. Let cool completely before repeating on the back side as desired.
Warm Tips: Please allow 1-3mm tolerance due to manual measurement. In order to make the sublimation wind spinner cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible. The color may exist slight difference due to different screen display. If the sublimation paper is slow-drying and the ink is not dry before printing, or the sublimation paper is damp, the print will be blurry.

Binding: Kitchen

Part Number: Wefanify-4-SW

model number: 4-SW