CCTREE PEO Diamond Build Surface Sticker 257x257mm, 3PCS 3D Print Heat Bed Platform Sticker Without Spring Steel Sheet and Magnetic Base for Bambu Lab X1/X1C/P1P/P1S/A1 3D Printers

Brand: CCTREE

Features:

• 【3 PCS PEO Diamond Build Surface Sticker Design】smooth PEO Diamond surface which can print excellent diamond patterns. The price of a 3-pack is more affordable than buying a single-build plate. Since this sticker does not have a spring steel plate design and a magnetic base, you can stick this sticker on an old printing platform. Note: The adhesive of this sticker is strong, so it is recommended to align the base before sticking it
• 【Support Various Filaments】For PEO plate we suggest PLA, TPU, and PETG. (The corresponding temperature PLA/TPU: 50-70℃; PETG: 70-80℃.
• 【Easy to install】Stick the PEO Diamond Build Surface Sticker on the magnetic base. There is a protective film on PEO. Please peel the film before using it. Excellent adhesion, easy model removal
• 【Compatible 3D Printers】The PEO Diamond Build Surface Sticker is suitable for 3D printers with 257*257mm platform size, such as suitable for Bambu Lab X1C/X1/X1E/P1P/P1S/A1, Please confirm your 3D printer platform size before ordering
• 【After-Service】If you have any questions or need technical support about the product, Please press "Ask a question" through our storefront's page, and report an issue through the “Your Orders” page. We will respond within 24 hours

Details: Specification Size: 257x257mm compatible with: Bambu lab X1C/X1/X1E/P1P/P1S/A1 Packing list 1x Upgrade 257*257mm 3 PCS Build Surface Sticker, Affordable price for a 3-pack to replace your old printing platform with stickers. About the adhesion of the print bed: 1、Before printing, it is necessary to wipe the plate with a soft cloth to、ensure that there is no dust on the bed to affect the adhesion of the print bed. 2、Before printing, it must be leveled, and keep a distance of A4 paper thickness between the nozzle and the platform, to avoid the nozzle scratching the surface and avoiding the deformation of the bottom surface of the print model. About the cleaning of the print bed after printing: 1、Wipe the stains with over 95% strength alcohol gently, the recommended cleaning time is less than 5 minutes. 2、Do not use any strong chemical reagents to clean PEI. About removing the prints: 1、The hot bed temperature must drop to room temperature before removing the prints, otherwise it is easy to cause the smooth PEI film to tear and fall off. 2、 The small prints can be taken off directly by hand, the large prints need to bentPEI sheet by hand and removed without other tools.

Part Number: 257*257 PEO

model number: 257*257 PEO