ELEGOO Standard 2.0 3D Printer Resin 1000g Grey, Rapid Precise Printing Low Odor 405nm LCD UV-Curing for LCD 3D Printer

Brand: ELEGOO

Color: Grey 1000g 2.0

Features:

• Upgrade Plant-Based Resin – Standard 2.0 resin is upgraded to eco plant-based version, 40% reduction in bad resin odor. High accuracy and low shrinkage, must be your brilliant go-to resin
• High Degree of Compatibility – ELEGOO resin is not only compatible with ELEGOO Mars and Saturn series, but also work well on most LCD and DLP 3d printer. Wildly used for miniatures and home 3d printing
• Unique Formula for Fast Curing – After many times adjustment, ELEGOO uv resin has a higher liquidity than other, which makes the print cured quickly and well, and easier to remove and clean
• Fine Details and Amazing Colour – ELEGOO 3d resin holds details fantastically, from large flat surfaces to tiny detail, meanwhile, the colour is also amazing. Quality of prints are exceptional
• What You Will Receive – Well-packed ELEGOO Resin, leak-proof bottle and our friendly customer service

Details: ELEGOO Standard 2.0 Resin Specifically Designed for LCD 3D Printers Key features: Plant-based material 40% lower odor High hardness, low shrinkage Great surface finish Fast curing properties for fast printing Consistent printing quality How to use: Please shake well before use Keep your room well-ventilated while printing Cured the prints with curing machine to get better result Recommeded temperature 20°C - 25°C Always wear nitrile gloves to avoid direct skin contact Wash with plenty of water immediately if you get direct skin contact with resin How to storage: Keep away from children Do not put the prints in mouth Do not expose resins to heat, flames, sparks or any source of ignition. How to dispose: Please place it in the water under the sunlight to completely cure the remaining resin before discarding If you have an empty container of resin, swish some isopropyl alcohol in it to clean the walls of the container, pour it into a clear contained (glass, plastic, plastic bag) and expose it to UV light until the isopropyl alcohol has evaporated and the resin has hardened, and throw it away.

Part Number: OP-3D-G12-H1