Gizmo Dorks PEI Sheet 3D Printer Build Surface 300mm x 300mm (11.8" x 11.8") with Laminated 3M 468MP Adhesive, Made in The USA

Brand: Gizmo Dorks

Color: amber yellow

Features:

• Made in the USA - Ultem 1000 PEI sheet installs quickly via the laminated adhesive on top of existing flat build platforms (e.g. borosilicate glass)
• Bubble free application - The 3M 468MP adhesive is already preapplied to the PEI; simply peel back the tape liner for quick adhesion to the bed
• Build Surface - PEI is the perfect no prep build surface which is endlessly reusable for multiple prints; clean with isopropypl alcohol between prints (or with acetone on a COLD bed)
• ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry
• Dimensions: 300mm x 300mm / PEI thickness: 0.56mm (0.022 inches) / Laminated 3M 468MP adhesive thickness: 0.13mm (0.005 inches)

Details: Polyetherimide Ultem 1000 (Made in the USA) PEI (Polyetherimide) is one of the best all around surfaces to use for 3D printing. It has great affinity when used at proper bed temperatures, but once cooled the printed part releases easily from the bed. The amber yellow PEI surface is perfect for printing a wide range of commonly used thermoplastic filaments such as PLA, ABS, PETG, TPU, and more. The best part about using PEI is it requires little to no maintenance. It is recommended to clean the surface with isopropyl alcohol in between prints. That's it. The ease of use has made PEI the gold standard in build surfaces for 3D printing. Specs 0.5mm thick PEI film Each sheet comes laminated with preapplied 3M 468MP adhesive Made from Ultem resin certified to ASTM D5205 PEI 0113 standard (Certificate of Compliance available) Size Options 200mm x 200mm Compatible with Anet A8, Anet A6, Reprap Prusa i3, and more 235mm x 235mm Compatible with Creality Ender 3, Creality CR-20, and more 300mm x 300mm Compatible with Creality CR-10, Creality CR-10S, Lulzbot Taz 6, Lulzbot Taz 5, Tevo Tornado, Hictop Prusa i3 DIY, and more Application Gizmo Dorks PEI film is super easy to apply. It comes with bubble free adhesive already laminated to one side of the PEI. Simply remove the adhesive liner and apply to your print bed. It is easiest to apply at a downward angle while using a straight edge if needed to apply a little bit of pressure. It is recommended to apply PEI to a flat borosilicate glass bed. Borosilicate glass has a low coefficient of thermal expansion which provides a good flat surface to apply PEI to. Be sure to remove the greenish blue polycling wrap that covers the PEI sheet. That is a protective plastic that should be thrown away prior to use. Care and Use Before each print it helps to clean the surface of the PEI sheet with isopropyl alcohol (70-91%). Fingerprints or residue will build up on the surface and inhibit surface adhesion which the isopropyl alcohol will clean. After a good number of prints, PEI may lose it's surface adhesion. Please simply sand the PEI sheet down with 2000 grit sandpaper. Looking for Another Size? Shoot us a message. We'll see if we can do something. We also have different size options in the 1mm thick PEI sheet which can be found here.

EAN: 0887503182125

Part Number: GD-PEI3M-300MM

model number: GD-PEI3M-300MM