OVERTURE PETG Filament 1.75mm, 3D Printer Filament, 6kg Spool (13.2lbs), Dimensional Accuracy Probability +/- 0.02 mm, Fit Most FDM Printers (6 Color (6-Pack))

Brand: OVERTURE

Color: 6 Color (6-pack)

Features:

• 【High Performance & Compatibility】 Combines the advantages of both PLA and ABS with Overture PETG, featuring the ease of printing with PLA and improved mechanical properties of ABS, including enhanced impact resistance and superior layer adhesion
• 【Clog-Free & Bubble-Free】 Designed and manufactured with our patented clog-free formula to get a smooth and seamless printing experience. All spools undergo thorough drying for 24 hours before packaging and are vacuum-sealed in resealable foil packaging. To maintain optimal performance, store PETG filament in sealed storage with desiccants (silica gel) or dry for >6 hours at 65˚C
• 【Dimensional Accuracy & Consistency】Advanced CCD diameter measuring and self-adaptive control system in the manufacturing insure these tough PLA filaments to be strict tolerances. Diameter 1.75mm, dimensional accuracy (98%) + / - 0.02 mm without any exaggeration
• 【Wide Compatibility and Color Selection】 Overture filaments seamlessly integrates with consumer and industrial 3D printers. Explore your creative side with our extensive selection of vibrant colors, ensuring a spectrum of possibilities for your unique creations
• 【Risk-Free & Lifetime Service】 Discover worry-free 3D printing with Overture filament—backed by our lifetime satisfaction service. No matter the challenges, we're here to support you for a seamless 3D printing experience. Trust Overture as your dependable supplier of 3D printing filaments and accessories

Details: PETG filaments are made of premium PETG plastic which combines the advantages of other filaments such as safe and odorless; little shrinkage rate; high impact strength and good liquidity (flows smoothly); Furthermore, this beautiful PETG filaments make prints come out with a little "shine" or "spark" to it.Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.FAQs:Why can't the filaments stick to the build bed?1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure a strong first layer adhesion;3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;4. If the effect is not good, it is recommended to try printing the draft before printing.Specification: Temperature Recommended Extrusion/Nozzle Temp: 230°C - 250°C (446℉~ 482℉)Heated Bed Temp: 80°C - 90°C (176℉~ 194℉)Filaments Diameter and Accuracy: 1.75 mm +/- 0.05Filaments Net Weight: 6 kg (13.2 lbs) Recommended Printing Conditions:Cooling Fan: Turned onPrinting Speed: 30~50(mm/s)Raft Separation Distance: 0.14(mm)Retraction Distance: 1~3 mm(Note：Based on 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions may vary with different nozzle diameters.)Packaging Included:6 × spool of PETG filaments 

EAN: 0850006233489

Binding: Office Product

Part Number: OVPETG175

model number: OVPETG175