SUNLU Official Filament Dryer S1 Plus, Built-in Circulation Fan, Filament Dryer Box Storage Box for 3D Printer Filament 1.75 2.85 3.00, S1 Plus White

Brand: SUNLU

Color: Pure White S1 Plus

Features:

• 【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments.
• 【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market
• 【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect.
• 【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc.; C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm.
• 【User-friendly Design&1 Year Guaranteed After-Sales Service】 A: The design of two rollers inside the box allows you to print while drying; B: 2 inch large screen LCD monitor, can display temperature and time clearly and brightly; C: Ultra quiet design, less than 10db while operating, no disturbing of your life and work; D: Exquisite packaging design- best gift: Come on to buy one to present to your friends who love 3D printing
• 【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament.

Details: SUNLU FilaDryer S1 is a dry storage box designed to provide the optimum environment for 3D printing filaments. 3D PRINTING-MATE Drying while printing to improve your 3d model

Personality settings:
1. Add and subtract temperature: Users can adjust the temperature of the drying oven according to factors such as the material of the consumables, the ambient temperature, and the humidity. It is recommended to bake for more than 3 hours before printing for better results. When the drying oven is in the dry state, press the left button to decrease the temperature, and press the right button to increase the temperature. When the setting is completed, stop for about 3 seconds, the drying oven will automatically save and switch to the actual temperature interface. Temperature adjustment range: 35℃~55℃. The measured temperature is displayed as PV, and the set temperature is displayed as SV.

NOTE:
1: Before printing, it is recommended to bake it for ≥3 hours, and then print, the effect will be better.
2: When the ambient temperature is low and the drying oven does not heat up to the set value, it is necessary to extend the baking time> 1 hour.
3: It will have better printing effect when used with printer.

MAXIMUM CAPACITY:
Filament Diameter: 1.75mm/2.85mm/3mm
Max Capacity: Φ210×85(H) mm

Packing List

1* Filament Dryer
1* Adaptor
1* Instruction
2* Rollers

EAN: 0782950697805

Part Number: 3D Printer Filament Dryer S1

model number: SUNLU Filament Dryer S1 Plus